DeskLine D15
- Usable energy
- 15.4 kWh
- Rated power
- 10 kW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 48 V DC
- Footprint
- 0.42 m²
- Protection rating
- IP21 / IK08
Solutions
Battery energy storage, from 5 kWh to multi-megawatt
Four product platforms covering every scale of storage project, all built on lithium iron phosphate (LFP) cells, multi-level battery management and a common cloud monitoring layer.
Desk & rack storage
Technical rooms, edge sites and mission-critical loads
Cabinet and 19" rack systems for installations where floor space is limited and access must be controlled. Front-access modules, integrated BMS and hot-swappable design simplify maintenance without shutting down the load.
- 19" rack and free-standing desk formats
- Hot-swappable modules, front access only
- Integrated fire detection and forced-air cooling
- Modbus TCP and CAN interfaces for existing SCADA
Featured systems
RackLine R100
- Usable energy
- 102.4 kWh
- Rated power
- 50 kW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 512 V DC
- Format
- 19" × 42U
- Protection rating
- IP20 / IK09
Indicative figures. The final configuration is defined after a technical assessment.
Residential storage
Single homes, villas and apartment blocks
Stackable wall or floor units that pair with rooftop PV to maximise self-consumption and provide backup during outages. Silent operation, compact footprint and app-based monitoring for the end user.
- Stackable from 5 kWh to over 40 kWh
- Low-voltage and high-voltage variants
- Backup transfer for essential circuits
- IP65 enclosure for indoor or sheltered outdoor use
Featured systems
HomeStack S
- Usable energy
- 5.1 – 25.6 kWh
- Rated power
- 3 – 12 kW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 51.2 V DC
- Cycle life
- 6 000 cycles
- Protection rating
- IP65
HomeStack HV
- Usable energy
- 8.2 – 40.9 kWh
- Rated power
- 5 – 20 kW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 150 – 600 V DC
- Cycle life
- 8 000 cycles
- Protection rating
- IP65
Indicative figures. The final configuration is defined after a technical assessment.
Commercial & industrial
Factories, logistics, retail, hotels and offices
All-in-one liquid-cooled cabinets combining batteries, power conversion, thermal management, protections and fire suppression. Designed for daily cycling under demand-charge and tariff-arbitrage strategies.
- All-in-one cabinet: battery, PCS and cooling
- Liquid cooling for a tighter cell temperature spread
- Peak shaving, tariff arbitrage and PV smoothing
- Parallel operation for multi-megawatt-hour sites
Featured systems
PowerCube C215
- Usable energy
- 215 kWh
- Rated power
- 100 kW
- Cell chemistry
- LFP (LiFePO₄)
- C-rate
- 0.5C
- Round-trip efficiency
- ≥ 90 %
- Protection rating
- IP55
PowerCube C418
- Usable energy
- 418 kWh
- Rated power
- 200 kW
- Cell chemistry
- LFP (LiFePO₄)
- C-rate
- 0.5C
- Round-trip efficiency
- ≥ 91 %
- Protection rating
- IP55
Indicative figures. The final configuration is defined after a technical assessment.
Utility-scale
Grid-connected storage plants and hybrid parks
Containerised blocks for front-of-meter projects: capacity firming, renewable time-shifting, ancillary services and grid-forming operation. Delivered as pre-tested blocks to compress site works.
- 20 ft blocks from 5 MWh, scalable in parallel
- 1 500 V DC architecture with liquid cooling
- Grid-forming and frequency-response capable
- Plant controller with SCADA and market interfaces
Featured systems
GridBlock 5
- Usable energy
- 5.0 MWh
- Rated power
- 2.5 MW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 1 331 V DC
- Round-trip efficiency
- ≥ 92 %
- Protection rating
- IP55 / C4
GridBlock 8
- Usable energy
- 8.4 MWh
- Rated power
- 4.2 MW
- Cell chemistry
- LFP (LiFePO₄)
- DC voltage
- 1 500 V DC
- Round-trip efficiency
- ≥ 93 %
- Protection rating
- IP55 / C5
Indicative figures. The final configuration is defined after a technical assessment.
Engineered against recognised frameworks
Our systems are designed and documented in line with the following standards and test requirements. The certification scope is confirmed for each configuration and target market.
- IEC 62619
- IEC 63056
- IEC 62477-1
- UN 38.3
- CE / UKCA
- IEC 61000 (EMC)
Included with every system
Sizing & simulation
Load-curve analysis, dispatch simulation and payback modelling before any order is placed.
Integration engineering
Single-line diagrams, protection coordination and documentation for the grid-connection application.
Commissioning
On-site start-up, functional testing, capacity verification and operator training.
Monitoring & O&M
Cloud EMS with alarming and reporting, preventive maintenance and spare-part logistics.
Not sure which platform fits?
Tell us your available power, space and objectives — we will propose a configuration.